Abrasive Spiral Band Zirconia
Designed for maximum stock removal. The outstandingly aggressive cutting quality of zirconia alumina is effective at increased contact pressures and ensures exceptional stock removal.
Abrasive: Zirconia alumina Z
Matching, reusable rubber drum holders for using abrasive spiral bands: Cylindrical
The high degree of fitting accuracy between the components ensures that the abrasive spiral band remains securely attached to the rubber drum holder during use.
Abrasive spiral bands are designated Cylindrical Abrasive Sleeves according to ISO 2421.
Cylindrical rubber drum holders are designated Holding Fixtures of Cylindrical Abrasive Sleeves according to ISO 15637-1.
Advantages:
Because of slots, the holder expands during use, guaranteeing that the abrasive spiral band is firmly clamped in place
Outstanding tool life due to special manufacturing process even under the most demanding operating conditions
Particularly high stock removal and high aggressiveness of the abrasive
Recommendations for use:
Abrasive spiral bands can be mounted and removed by turning them slightly to the right
Abrasive spiral bands are easier to mount when the rubber drum holder is mounted on the tool drive
The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed
Abrasive spiral bands achieve their best performance at a recommended cutting speed of 2030 m/s
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Application examples:
Removing weld seams in steel construction
Fine grinding work in equipment, tank and vessel construction
Post-processing for assembly and repair work
Machining edges and contours in aircraft engine construction